2001 Ford Superduty F250 HELP!!!!!
I am having a brake problem on one side of the truck .. The truck has 80000 miles. The brake pads were replaced appox 3 months ago and the rotors were replaced at that time. On the inside front only on one side the brake pad has worn into the rotor. The other side is perfectly ok. What could be causing this problem.
Thanks A Million |
| posted 12/06/03 by dwheelington |
| [Post Reply Message] |
|---|
Most recent 6 replies to: 2001 Ford Superduty F250 HELP!!!!!
| Re: 2001 Ford Superduty F250 HELP!!!!! |
|---|
| You probably have a frozen calliper. It is probably stuck causing the brake pad to constantly wear down. |
| posted 12/08/03 by Fred |
| Re: 2003 Ford Superduty F250 HELP!!!!! |
|---|
| Im going to lift my 03 f250 6 inches and I have 315-70-17 size tires how will this look |
| posted 03/14/04 by The FIREMAN |
| Re: 2001 Ford Superduty F250 HELP!!!!! |
|---|
| It will look awesome. Dont settle for a 4 in. Lift, it wont do it justice. What lift kit are you using? |
| posted 04/08/04 by ramidus |
| Re: 2001 Ford Superduty F250 HELP!!!!! |
|---|
| I am a ford master mechanic and all i do is work on f 250 and bigger. Your prolem is a stuck caliper slid more then likley but you should have a pro look at it though |
| posted 05/01/04 by scott |
| Re: 2001 Ford Superduty F250 HELP!!!!! |
|---|
| I have a 2000 f250 sd w/ a 5.4. It has a leaky high pressure hose on the power steering pump. I have changed the hose thinking it was a faulty fitting. But after the install ( of ford o.e.m. Hose ) it is still leaking. I used a set of picks to cheack for a leftover o- ring in the outlet and cleaned the outlet. I t all threaded in right and the new o-ring has seated properly. Can anyone help ? |
| posted 06/06/04 by dan-o |
| Re: 2003 Ford Superduty F250 HELP!!!!! |
|---|
| Guys I am trying to change my fuel filter it seems to be stuck in the cap. I don't have the manuel and trying to save some money not working so far. The filter is on the top of the engine. I don't see any screws to remove can't see whats holding it in. |
| posted 06/25/05 by steve |
|
|
|
|
