 |
|
Adhesives & Gluing Equipment Manufacture
> Arkansas
Arkansas
Adhesives & Gluing Equipment Manufacture search results
|
|
|
|
|
| | |
| |
How to Choose and How to Find Adhesives & Gluing Equipment Manufacture
Adhesives and glues bond two items or compounds together to make them stick, and can originate from natural or synthetic substances. Adhesives and gluing equipment can assist in the development and manufacturing of adhesives and glue. The process can involve glues, cement, silicate, resin, sealants, chemicals, coatings, encapsulants, bonding agents, lubricants, acrylics, laminates, and release agents. Adhesives and glue can be used to make a variety of products, including tape, film adhesives, acid free materials, optically clear adhesives, and thermally conductive adhesives. Many of the lubricants are water soluble and dissolvable over time. Sometimes the chemicals used in adhesives and glues can be irritants, so if you are especially sensitive to such chemicals, carefully read all manufacturing information before use. Some adhesives and gluing equipment manufacturers also make cleaning agents. Adhesive and gluing equipment can include perimeter spacers, interconnecting equipment, shielding, polishing machines, encapsulate, films, and thinning supplies. You can find adhesives and gluing equipment and manufacturers near you by looking in your local phone book or by searching online directory listings. Online, you can research companies, read up on the gluing and adhesives industry, review the process, and find out what goes into adhesives and glues, such as cement, silicate, resin, sealants, chemicals, coatings, release agents, bonding agents, and encapsulants.
|
|
|
|
| |
|
|
|
|
HISCO INC
|
501-568-3105
|
5420 Northshore Dr
North Little Roc, Arkansas 72118
|
|
|
|
LOCTITE CORPORATION
|
501-954-8483
|
3305 Doral Dr
Little Rock, Arkansas 72212
|
|
|
|
AIR POWER INC
|
501-455-6116
|
11000 Otter Creek East Blvd
Mabelvale, Arkansas 72103
|
|
|
|
BORDEN CHEMICAL INC
|
501-332-5293
|
|
Malvern, Arkansas 72104
|
|
|
|
PRESCOTECH
|
479-646-2973
|
3233 Zero St
Fort Smith, Arkansas 72908
|
|
|
|
|
|
|
It is wise, before using certain glues and sealants, to pay close attention to how water soluble they are. Many silicate materials do not release easily and should not be used around products that may retain these chemicals. If you are not sure if a glue or encapsulant is removable, it is very important to read the manufacturers' information, which is usually available on the packaging materials. The purpose of the glues is to provide a coating that seals with the surrounding surfaces, which means the products will be potentially permanently sealed. Surfaces that are more porous will more likely need a gel to provide the seal, such as a liquid cement or putty. Usually liquid cement will provide the thick encapsulant needed to bond porous materials quickly.
|
|
More Categories:
|
|
If you are looking for products to handle adhesives and Glue, take a look under Adhesives and Gluing Equipment Manufacture in Arkansas using the MagicYellow.com directory.
|
|
