 |
|
Adhesives & Gluing Equipment Manufacture
> Maine
> Kennebunk
Kennebunk
Adhesives & Gluing Equipment Manufacture search results
|
|
|
|
|
|
|
Adhesive & Sealant Supplies
|
| Sells static mixers, hand-held pneumatic and manual dispensing guns, plastic dual cartridges, syringes, meter-mix-dispense equipment and accessories. |
|
|
|
|
|
|
|
|
|
|
|
|
| | |
| |
How to Choose and How to Find Adhesives & Gluing Equipment Manufacture
Adhesives and glues bond two items or compounds together to make them stick, and can originate from natural or synthetic substances. Adhesives and gluing equipment can assist in the development and manufacturing of adhesives and glue. The process can involve glues, cement, silicate, resin, sealants, chemicals, coatings, encapsulants, bonding agents, lubricants, acrylics, laminates, and release agents. Adhesives and glue can be used to make a variety of products, including tape, film adhesives, acid free materials, optically clear adhesives, and thermally conductive adhesives. Many of the lubricants are water soluble and dissolvable over time. Sometimes the chemicals used in adhesives and glues can be irritants, so if you are especially sensitive to such chemicals, carefully read all manufacturing information before use. Some adhesives and gluing equipment manufacturers also make cleaning agents. Adhesive and gluing equipment can include perimeter spacers, interconnecting equipment, shielding, polishing machines, encapsulate, films, and thinning supplies. You can find adhesives and gluing equipment and manufacturers near you by looking in your local phone book or by searching online directory listings. Online, you can research companies, read up on the gluing and adhesives industry, review the process, and find out what goes into adhesives and glues, such as cement, silicate, resin, sealants, chemicals, coatings, release agents, bonding agents, and encapsulants.
|
|
|
|
|
|
|
|
|
C W HAYDEN COMPANY INCORPORATE
|
207-783-2054
|
556 Kittyhawk Ave
Auburn, ME 04210
50.8MI from Kennebunk
|
|
|
SHEEPSCOTT MACHINE WORKS INCOR
|
207-563-2299
|
Damariscotta, ME 04543
69.6MI from Kennebunk
|
|
|
|
|
|
It is wise, before using certain glues and sealants, to pay close attention to how water soluble they are. Many silicate materials do not release easily and should not be used around products that may retain these chemicals. If you are not sure if a glue or encapsulant is removable, it is very important to read the manufacturers' information, which is usually available on the packaging materials. The purpose of the glues is to provide a coating that seals with the surrounding surfaces, which means the products will be potentially permanently sealed. Surfaces that are more porous will more likely need a gel to provide the seal, such as a liquid cement or putty. Usually liquid cement will provide the thick encapsulant needed to bond porous materials quickly.
|
|
More Categories:
|
|
If you are looking for products to handle adhesives and Glue, take a look under Adhesives and Gluing Equipment Manufacture in Kennebunk using the MagicYellow.com directory.
|
|
