Find Local Fireplace & Chimney Contractors in Seattle
Chimney Relining Repair & Restoration Terms to Know
If you have a chimney, furnace or wood burning stove, it's important to keep up with routine chimney relining, repair and restoration. Over time, chimneys can become clogged with natural build up and shift so the flue no longer lines up and gas doesn't vent effectively. An inspection, deep cleaning and relining will improve the efficiency of your chimney, produce more heat, protect your safety and reduce your carbon footprint. Here are some terms to know before hiring a chimney relining repair and restoration company.
Chimney Inspector - A licensed, certified professional trained to inspect the safety of a fireplace and surrounding roof. They will check the mortar, clay liner, insulation, pipe and cap for safety and efficiency.
Chimney Sweep - Because there is a lack of regulation, a chimney sweep does not need a certification or license. They brush out build up in the flue and clean your chimney.
Historic Masonry Repair - If you have a stone or brick chimney with historic value, make sure you hire a firm with a mason that can protect the integrity of your historic system.
Cap - Usually a stainless steel mesh covering over a chimney that prevents rain and other debris from entering and clogging the chimney.
Liner - Usually made of clay or metal, the liner keeps oil and other harmful chemicals in the chimney and out of your home. The liner should be inspected and maintained for safety.
Flue - The chamber in the chimney that contains the carbon monoxide and other combustible, harmful materials so they are kept out of your home.
Take advantage of our gigantic network of construction pros, specializing in Chimney repair in the Seattle area. Using us can mean the difference between a job well done & a job undone. Consider browsing our listing of experts in the Chimney Restoration field, & bring your project to its full potential.
Chimney repair and restoration is often needed by residential homeowners that have a fireplace, wood stove, or wood burning furnace of some sort. Since most fireplaces have a liner, cap, metal flue, and damper, they require maintenance at some point. Therefore, a certified professional can be contacted to repair or reline the wood or coal burning unit. Since there are certain safety guidelines involved, all stainless steel stove and fireplace units must be shut down and cool before being dealt with.
When you consider the different aspects of home furnace and fireplace units, the professionals in this field have to have a good knowledge of chimney throat liner replacement, tools used to sweep with, gas heating units, as well as brick and mortar chimneys. Some heating units even run off of oil products. To cool these metal liners and chimney throats down, water is often used. Most cap, flue and liner parts can be repaired or replaced on a wood burning fireplace or coal furnace. This is often a great money saver and is cheaper than purchasing an entirely new wood stove or gas fireplace.
Online, you can learn a lot about chimney repair, wood stove dampers, what it takes to reline a heating unit, and which options are the best money saver ideas. You may be able to use the information you find to either locate a top chimney repair and maintenance professional in your area, or get involved with a DIY project on your own. Just be sure to take the right safety precautions if you do.